CCD:
 FULL 13'x13'armin

READOUT:
 QUAD     

GAIN INDEX:
 3: Read Noise ~ 3.5 ADU = 3.5 e-

FILTER SET:
 UBVRI    (Only using R filter)


-----------------------------------------------------------------------
NOTES FOR TARGET FIELDS
-----------------------------------------------------------------------
These observations should be taken over the first four hours of the night
on November 29 (November 30  UT),using the R filter only.

The goal of this project is to provide dedicated recovery observations of
newly discovered Kuiper belt objects to ensure that the ephemerides of
these bodies are determined with significant precision for further 
photometric and spectroscopic study.

The target KBOs are all moving ~1 arcseconds/hr. So in order to figure 
out which source is the KBO in the image, I require multiple observations 
of the same target separated by enough time to the detect the object's motion. 

In order to distinguish my KBO from the background stars, I require
at least two sets of observations spaced approximately an 1.5hrs apart.  

A typical set of observations for my targets would be to slew to 
the predicted KBO position and take TWO 400s exposures, and an 1.5 hrs
later come back to the target and take another TWO 400s exposures.

All objects should be observed twice. If time is short or
weather is bad please observe only the high priority targets. If
time is short and it is not possible to get a second set of observations 
on all targets, please try and get two sets of observations on my  
priority 1 target. 

1. Make sure that the focus is good.  

2. Check to make sure that the coordinates are correct.  

3. Take the TWO 400 second exposures 

-----------------------------------------------------------------------
NOTES FOR CALIBRATION FIELDS 
-----------------------------------------------------------------------

1.There are no standard stars needed for these observations

2. Dome flats in R filter are needed.

3. Bias images in R filter are needed.

-----------------------------------------------------------------------
OBSERVING SEQUENCE
-----------------------------------------------------------------------

TARGET          K924B
PRIORITY        1
COORDINATES     01:05:35.3348  -05:24:49.959
FILTER(S)       R
INTEGRATION(S)  400s,400s
TOTAL TIME      920s
AIRMASS         Less than 2.0
NOTES          Please try and get a 2 hr seperation between next pair of images if possible.
                Any conditions acceptable.  Above coordinates in epoch 2000.0

TARGET          K926A
PRIORITY        1
COORDINATES     00:25:48.2021  -11:45:43.398 
FILTER(S)       R
INTEGRATION(S)  400s,400s
AIRMASS         Less than 2.0 
TOTAL TIME      920s 
NOTES           Any conditions acceptable.  Above coordinates in epoch 2000.0

TARGET          K825B  
PRIORITY        2
COORDINATES     23:52:57.9268  -23:23:10.334 
FILTER(S)       R
INTEGRATION(S)  400s,400s
TOTAL TIME      920s 
AIRMASS         Less than 2.0
NOTES           Any conditions acceptable.  Above coordinates in epoch 2000.0


TARGET          2008 SJ236
PRIORITY        2
COORDINATES     01:30:38.0   +12:22:35 
FILTER(S)       R
INTEGRATION(S)  400s,400s
TOTAL TIME      920s
AIRMASS         Less than 2.0
NOTES           Any conditions acceptable.  Above coordinates in epoch 2000.0

REPEAT OBSERVING SEQUENCE - Take a second set observations of each target 
approximately 1.5 hours or longer after the first set of observations. See above in the 
Notes for Targets section..